Reliable & Accurate  WIND SENSORS
> anemometers and wind vanes with current loop
> loop powered (only 15-24 V DC loop power required)
> with simple two wire 4..20 mA calibrated output
> reliable current signal with simple 2 wire connection
> signal can be transported over long cable distances

 For Industrial & professional applications, like cranes, wind turbines, solar farms etc.

 

Low Cost Professional Anemometer Max40+ 4..20 mA output signal

       max40 anemometer 4 20 ma

* Anemometer with integrated 4..20 mA output (2 wire) for control applications (eg PLC)
* Highly accurate (typ 0.2 m/s) by two parameter calibration (slope and offset)
* High reliability: Thousands of units operating worldwide
* Standard range 0-50 m/s, simple two wire 4-20 mA output (only current loop)  
* Special range on request.
* With calibrated 4-20 mA output 
* Specifications with 4-20 mA  
* Connections 4-20 mA
* Calibration certificate
* Calibration report 
* Modules for reading values available with loop powered display, loop power supply
* Extension cable 2 euro/meter, waterproof cable coupler set ( 1 required for 1 extrension cable)
 

 

 

Low Cost Professional Wind Vane Dir21+ 4..20 mA output signal


      wind vane 4 20 ma output industrial sensor

* Windvane with integrated 4..20 mA output (2 wire) for control applications (eg PLC)

* With calibrated 4-20 mA output  
* Connections with  4-20 mA
* Specifications with 4-20 mA  
* Modules for reading values available with loop powered display, loop power supply
* Extension cable 2 euro/meter, waterproof cable coupler set ( 1 required for 1 extrension cable)

OPTION:
 Optional Monting Arm for  MAX40+ /DIR21+ combination
 Clamp size available for any pole to be specified at order.